|
|
|
|
Maintenance-free in-line pump available in sizes from 1'' to 2''. Motor sizes from 1/4 to 3 HP at 1750 RPM. Available in bronze-fitted and all-bronze construction. Flows to 200 GPM and heads to 55 feet.
Request Rapid Price Quote
|
|
|
Close-coupled in-line mounted pump available in 1-1/2'' through 8'' sizes. 1/4 to 50 HP at 1750 RPM and 5 to 60 HP at 3500 RPM. Available in bronze-fitted and all-iron construction. Flows to 2500 GPM, heads to 380 feet.
Request Rapid Price Quote
|
|
|
B&G Series 80-SC Split-Coupled Vertical In-Line Centrifugal Pump available in 1-1/2'' through 8'' sizes. 1/4 to 50 HP at 1750 RPM and 5 to 60 HP at 3500 RPM. Available in bronze-fitted and all-iron construction. Flows to 2500 GPM, heads to 380 feet.
Request Rapid Price Quote
|
|
|
Close-coupled in-line mounted pump available in 1'' through 2'' sizes. 1/4 HP through 2 HP at 1750 RPM and 1/2 through 15 HP at 3500 RPM. Available in bronze-fitted construction with flows to 200 GPM, heads to 225 feet.
Request Rapid Price Quote
|
|
|
Base-mounted, end-suction Series 1510 pumps are available in 1-1/4'' through 8'' sizes, 1/2 HP to 150 HP at 1750 RPM and 2 HP through 150 HP at 3500 RPM. Bronze-fitted, all-iron and bronze material configurations are available with flows to 4000 GPM, heads to 500 feet.
Request Rapid Price Quote
|
|
|
Foot-mounted, available in 3/4'' through 1-1/2'' sizes. 1/4 to 1 HP at 1750 RPM. Available in bronze-fitted, all-bronze and all-iron construction with flows to 115 GPM at 30 feet.
Request Rapid Price Quote
|
|
|
End suction, close-coupled, foot-mounted pump available in 1-1/4'' through 6'' sizes. Motor size 3/4 to 50 HP at 1750 RPM, 2 to 60 HP at 3500 RPM. Available in bronze-fitted, all-iron and all-bronze construction with flows to 2300 GPM, heads to 400 feet. For horizontal and vertical mount.
Request Rapid Price Quote
|
|
|
Foot-mounted, end-suction, close-coupled pump available in 1'' through 1-1/2'' sizes. Motor sizes 1/3 to 5 HP at 3500 RPM. Available in bronze-fitted construction with flows to 240 GPM at 115 feet. For horizontal and vertical mount.
Request Rapid Price Quote
|
|
|
The new standard in close-coupled general service pumps. The all new 316L Stainless Steel (wet end) pump available in 1", 1-1/4'' and 1-1/2'' sizes. 1/2 HP through 5 HP at 3500 RPM. Flows to 170 GPM and heads to 155 feet.
Request Rapid Price Quote
|
|
|
The Series VSC is a double suction pump that has a vertically split casing perpendicular to the pump shaft. The suction and discharge flanges have been rotated 90 degrees to face up, resulting in an extremely compact, space-saving design split case pump. The vertical flanges allow the series to provide up to 9000 lbs. in static flange loading capability.
Request Rapid Price Quote
|
|
|
The Series VSCS is a double suction pump that has a vertically split casing shaft similar to the VSC. In this case, however, the suction inlet is horizontal, while the discharge remains vertical. This configuration is ideal for side-suction piping arrangements and maintains a small footprint with the discharge in the vertical configuration.
Discharge connections range from 4'' through 12''. Capacities rangeover 9000 GPM with heads to 400 feet and motor requirements up to 600 HP.
Request Rapid Price Quote
|
|
|
NEW SERIES VSX® available in 6 piping configurations
The new VSX Double-Suction Split-Case Pump is designed for the new millenium. It features Maintenance-Free Bearings, new One-Piece Unitized Seal, Groutless Base Plate, Alignment-Friendly Coupling, reduced pump room footprint by up to 40% when compared to traditional split-case and vertical inline pumps. Read more in: Product Bulletin, Technical Bulletin. Our new VSX pump is available in 21 sizes!
Request Rapid Price Quote
|
|
|
Double-suction, base-mounted Series HSC³ pumps are available in 2'' through 10'' sizes. Motor sizes through 300 HP. Flows to 6500 GPM and heads to 400 feet. Bronze-fitted construction with a maximum working pressure of 175 psig. Features internally self-flushing mechanical seals for maximum lubrication, debris removal and heat dissipation. The internally flushed seals allow for a shorter shaft for reduced deflection for longer seal life.
Request Rapid Price Quote
|
|
|
Double-suction, base-mounted Series HSC-S pumps are available in 2'' through 10'' sizes. Motor sizes through 300 HP. Flows to 6500 GPM and heads to 600 feet. Bronze-fitted construction with working pressures available up to 400 psig with 250# ANSI flanges. This pump features externally flushed mechanical seals. Closed-end steel baseplate with full seam welds for strength and an open top for easy grouting.
Request Rapid Price Quote
|
|
|
Double-suction, base-mounted Series HSCS pumps are available in 6'' through 24'' sizes. Motor sizes through 4000 HP. Flows to 40,000 GPM and heads to 600 feet. Externally flushed mechanical seals are standard features on this series.
Request Rapid Price Quote
|
|
|
Hermetically Sealed Type
The Hermetically Sealed enclosure eliminates the possibility of water leakage into the winding. The liquid medium circulates between the rotor and stator liner providing lubrication and cooling to the bearings.
Wet Winding Type
A Wet Winding Type motor is one in which the motor windings are in direct contact with a liquid medium. The medium is clean, clear water. A completely waterproof insulation is used on the magnet wire used for the stator windings. The liquid medium inside the motor air gap and coils acts as a heat transfer device by circulating through the windings and transferring heat to the external casing. Dissipation of this heat occurs as the well water flows at a required velocity over the external case. As is the case in all submersible type motors, the internal liquid medium is also used for bearing lubrication.
Request Rapid Price Quote
|
|
|
Multi-stage Vertical Turbine Pumps with bronze impellers and cast iron bowls. The lineshaft turbine pumps have above-ground discharge with water-lubricated lineshaft bearings. The column pipe coupling has bronze centering spiders with fluted-rubber lineshaft bearings. The bowls are vitra-glass coated in the waterways for improve deficiencies. Capacities up to 10,000 GPM with heads to 150 feet per stage.
Applications:
- Cooling Towers
- Pressure Boosting
- General Water Service
Request Rapid Price Quote
|
|
|
An angle-pattern flow-straightening fitting that combines a diffuser-strainer orifice cylinder and full-length straightening vanes to provide ideal flow conditions for the pump suction. Sizes from 1-1/2'' to 10'' in NPT, flanged and grooved connections.
Request Rapid Price Quote
|
|
|
A combination shut-off, center-guided non-slam check valve and calibrated balance valve in one device. The combination of three valves in one minimizes cost and reduces installation time. Available in angle or straight pattern in 1'' through 16'' sizes; in flanged, grooved or NPT connections. The triple-duty valve has a cast iron body, brass seat, cast bronze disc and SS stem. A calibrated nameplate and memory button allow return of the valve to the balanced position after shut-off. The backseating valve stem allows repacking under full-line pressure.
Request Rapid Price Quote
|
